The daily maintenance cycle of the disc granulator is usually recommended to be carried out once per shift, which can ensure that the organic fertilizer equipment is always in good working condition. Here are some specific maintenance steps and suggestions:

1. Daily inspection: Before the start of each shift, the main components of the disc granulator, including bearings, gears, belts, disc bodies, etc., should be checked to see if there is loosening or wear, and timely adjustment or replacement.

2. Lubrication: Regularly fill the moving parts of the granulator with lubricating oil to reduce friction and wear. Lubricant selection and filling frequency should be based on the equipment manufacturer's recommendation.

3. Cleaning: After each use, the surface and internal parts of the machine should be cleaned, especially where it is easy to block, to prevent material accumulation from affecting the performance of the equipment.

4. Fastening: Check all fasteners to ensure that they are not loose. Loose fasteners may lead to unstable operation of the equipment and even accidents.

5. Wear check: Regularly check the wear of wearing parts, such as liner, scraper, etc., and replace according to the wear condition.

6. Safety check: Check the safety of the equipment, including protective devices, emergency stop buttons, etc., to ensure timely response in emergency situations.

7. Regular maintenance: According to the manufacturer's recommendations, regular maintenance, such as replacing bearings, checking electrical systems, etc.

8. Record maintenance: After maintenance and maintenance, the maintenance date and content should be recorded in order to track the maintenance history of the equipment and plan future maintenance.

By following these maintenance recommendations, you can ensure the long-term stable operation of the disc granulator, reduce the occurrence of failures, and improve production efficiency.