To properly lubricate the bearings of organic fertilizer equipment to reduce wear, the following steps and methods can be followed:

1. Choose the right lubricating oil: the injected lubricating oil must be clean, avoid contamination, and the seal must be good to prevent impurities from entering. Choosing the right lubricating oil type and viscosity grade is critical to reducing bearing friction and wear.

2. Check and replace lubricating oil regularly: check the quality and quantity of lubricating oil regularly, and replace or supplement lubricating oil in time to ensure that the bearing is always in a good lubrication state.

3. Clean bearings: Before adding lubricating oil, the bearings should be cleaned to remove the attached dirt and dust to prevent these impurities from increasing the wear of the bearings.

4. Use the correct lubrication method: Select the appropriate lubrication method according to the specific working conditions and bearing types of the organic fertilizer production line. Common lubrication methods include manual lubrication, drop oil lubrication, oil ring lubrication, oil rope lubrication, oil pad lubrication, etc.

5. Control the amount of lubricating oil: the amount of lubricating oil must be controlled within the standard range, too much or too little will affect the performance of the bearing. For example, too much may cause the bearing to overheat, while too little may lead to insufficient lubrication.

6. Cleaning and tools of lubricant: Ensure the cleanliness of lubricating oil and refueling tools to avoid the intrusion of pollutants. At the same time, the filling place of lubricating oil should be pollution-free and sand-free to prevent the intrusion of all pollutants.

7. Regular maintenance and inspection: regular maintenance and inspection of bearings, pay attention to the temperature change of bearings, if there is an anomaly should be immediately shut down to check the cause and eliminate.