When using organic fertilizer granulator, it is indeed necessary to pay special attention to the moisture content of raw materials, which is crucial for the operating efficiency and particle quality of organic fertilizer equipment. Here are some important points about material moisture control:

1. Suitable moisture range: Generally speaking, the moisture content of organic fertilizer before entering the granulator should be controlled between 25% and 35%. The moisture in this range helps to maintain the proper flow of the raw material and particle stability, which is conducive to the normal operation of the granulator and the uniformity of the particles.

2. The impact of excessive moisture: if the moisture of the raw material is too high, it will lead to difficult operation of the granulator, and the particles are not easy to form, which may increase the risk of energy consumption and equipment blockage. In addition, excessive moisture may also affect the density and quality of the particles, and even cause stability problems in storage and transportation of the particles.

3. Moisture test and control: Before using the organic fertilizer granulator, the raw material should be regularly tested for moisture. Professional moisture measuring instruments or simple test methods, such as drying, can be used to accurately measure moisture content. According to the test results, adjust the ratio of raw materials in time or consider the pretreatment process, such as drying or mixing, to control the moisture within the appropriate range.

4. Optimization of process parameters: According to the actual situation, the process parameters of the organic fertilizer granulator can be adjusted to meet the production needs under different water conditions. Optimization of process parameters can improve the production efficiency and consistency of pellets.

Through scientific water control and process optimization, the production efficiency of organic fertilizer production lines can be improved, energy consumption can be reduced, and the high quality and market competitiveness of pellet products can be ensured.